|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||wooden case|
|Delivery Time:||15 days|
|Payment Terms:||T/T,L/C,Western Union|
|Supply Ability:||500sets per month|
|Compressor Brand:||Panasonic(Japan),Copeland(USA),Danfoss(Denmark)||Evaporator Type:||Tank With Coil Or Shell And Tube|
|Tank Capacity:||350 Lts||Condenser Type:||Finned Copper Tube With Low Noise Air Fan|
|Inlet/outlet Pipe Dia.:||DN65||Water Temperature Control:||5 -35 Degree Celsius|
|Compressor Type:||Hermetic Scroll Type||Water Pump:||3.0kW|
20 tons Industrial Air Cooled Water Chiller for Plastic Injection Molding Machine
Why use water chiller for your plastic injection molding process ? Two reasons:
1. To protect your equipment: Water Chiller is only a very small part cost of your whole plastic processing line, but it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come.
2. To increase output: water chiller provide continuously cold water in your plastic process, to improve molded products quality & cut down injection cycle time . Hence maximizes plastic injection molding machines’ productivity.
Our industrial using air cooled chiller adopt famous brand components to ensure the high quality and good performance for your usage. Popular PLC control system which show out working condition of each parts, and touch screen operate,to be controlled easily and powerful. Main four parts below:
1) Compressor: scroll type, brand copeland, danfoss, sanyo
2) Evaporator; SS304 tank with coil, capacity 350Litres
3) Condenser: Finned cooper tube with low noise axial fan
4) Tailor made power supply: 3phase,208-240v,380-415v,440v-460v,50hz or 60hz
High-quality compressor as the heart of the chiller, we choose Europe-Danfoss, the United States-Copeland, Japan-Panasonic High-quality import brand original compressor, built-in safety protection, low noise, power saving and durable, in order to increase the service life of the equipment.
It has the advantages of smooth and reliable operation, low efficiency and lower fault, low vibration noise, convenient maintenance and long life.
Heat exchanger :
Open loop- SS034 tank with coil
The use of 304 full stainless steel thick water tank, one welding molding, rust-proof, anti-corrosion, put an end to water pollution, once wiped, as fresh as new.Inside the automatic rehydration device, high-efficiency internal thread double-layer copper coil, real foot number evaporator, with large stainless steel water tank, quickly reduce heat, to achieve cooling effect.Compared with other machines of the same model, more cooling capacity, higher efficiency, more energy saving, cleaning and maintenance more convenient and fast.
Closed loop- Shell and tube
High efficient shell and tube type evaporator, which will require one water tank for this chiller, more efficiency
SIEMENS Electrical Systems
Bunp Microcomputer Control System
Air cooled condenser
High-efficiency air-cooled condenser high-speed punch punch perforation, the quality of the piece is reliable. Second turn edge, copper pipe and fins more closecontact, heat exchange efficiency, the use of fully imported copper pipe and automatic elbow welding, greatly enhance the air tightness, to eliminate refrigerant leakage phenomenon. It is particularly suitable for use in areas where water resources are scarce or water quality is high.
Stainless steel pump.
With high lift, large flow, low energy consumption, smooth and reliable operation, high efficiency and lower fault, low vibration noise, long life and other advantages, to ensure that water quality away from corrosion.
How to Choose Two Type evaporator ?
Chiller with inside tank and coil type evaporator-- open loop
Closed loop- Shell and tube type
|Outlet water temperature||5°C -35°C|
|Control type||Thermostatic expansion valve|
|Compressor||Type||Hermetic Scroll Type|
|Evaporator||Type||Stainless Steel Tank with Coil type or Shell and tube|
|Condenser||Type||Finned Copper tube +low noise air fans|
|NOTE 1.Normal conditions:Chilled water inlet temp is 12℃,outlet temp is 7℃,Ambient temp35℃;
2.Temperature condtion:Chillerd water range is 7℃--30℃,This series of unit requires the chient to use the liquid with the freezing point below the required temperature as the refrigerant.
3.Input power:3P-380V-50HZ,Allowable buctuate voltage:±10%.Allowable voltage difference in phase:±2%
4.Actual head lift is pump head lift minus the machine internal head loss(1mH2O=9.8KPa);
5.The above parameters are based are Refrigerant R22,for other parameters of Refrigerant R134A,R407C ect.refrigerants,plcontact us.
6.Due to technology updating, size meters listed data may change;The above datas are for reference only,please feel free to contact us for the latest data.
Images of 5hp to 40hp air cooled water chiller for plastic extrusion processing PP,PVC, PE,
3HP 5HP WATER CHILLER
15HP plastic water chiller
30hp plastic extrustion chiller
20hp 25 hp plastic mold cooling chiller
40Hp 30 tons air cooled water chiller for plastic
MGREENBELT OUR COMPANY
Shandong Mgreenbelt Machinery Co., Ltd. is a professional manufacturing, sales, and service as one of the water chiller equipment;
We have 18 years experience of the designer team, To provide the best service to our customer.
Our products have passed the SGS and CE system certification;
The main production of Industrial Chillers, air cooled water chiller, water cooled chiller, Screw chiller, glycol chiller, brine chiller and any industrial cooling system;
As a manufacturer with 34000 squire meters workshop, and more than 50 persons team, we provide the one-station service for customer, and complete solution provide.
Products in Europe, the Americas, Africa, Southeast Asia, more than 100 countries and gain acceptance.
|Plastics processing||Paper making||MRI|
|Injection molding||Beverage||Blood analyzers|
|Hydraulic system||Brewery||CT Scans|
|Laser industry||Food processing||Linear accelerator|
|Air conditioning||Waterjet cutting||Cosmetic processing|
|Grinder||Polyurethane foaming||Milk processing|
|Ice rink||Textile industry||Concrete mixing|
|Electroplating||Vacuum coating||Sonicleaning/ USC(ultrasonic cleaning)|
|PCB industry||Reactor||Slaughter processing|
|Central water cooling|
Plastic chiller working site
MGREENBELT water chiller range:
(1).The Temperature Range:-40ºC to +35ºC.
(2).Cooling Capacity Range: 2 RT to 500RT / 7 kw to 1750kw / 6020Kal to 1505000Kal
(3). The Refrigerant: R22/R404a/R134a/R507c/R410a
(4). We can also produce the chiller according to your requirements
As a professional manufacturer of water chiller for plastic injection molding machines , we can supply kinds of chillers to meet your different cooling requirement, if the chillers above is not workable for you, please feel free send needs to us directly.
Mobile : +86 18769762328 ( wechat, whatsapp, viber)
Skype : libra5813